Bespoke Tanks

Camplas Technology specialises in crafting bespoke tanks tailored to meet unique storage needs, including double-skinned tanks, bunded tanks, insulated tanks, and tanks with special linings.


Whether you need a bespoke tank for easily handled chemicals or those with more aggressive properties, we have a tailored solution to meet your specific requirements.

Custom built tanks- 24m3 Blow down cooling water supply tank for Tata Steel UK
150m3 storing Salmon ensilage
2x 45 cube Cradle mounted tanks storing De-Icer, Torp airport, Norway
2 x 25m3 for Formic acid
200 cubic metre Ice making tank - within the Arctic circle, Norway
5m3 tank for Formic acid delivered on Curtain sider
Previous slide
Next slide

Custom Build Storage Tanks

Camplas tanks are engineered to handle even the most challenging environments, such as storing tanks in remote parts of the Arctic Circle for ice production purposes. Whether it’s enhancing durability with double-skinned designs, preventing environmental contamination with self-bunded configurations, maintaining temperature with insulated options, or applying special linings for chemical resistance, Camplas Technology delivers solutions that meet specialized requirements with precision and reliability.

Double skin

Double skin tanks with vacuum leak detection for hazardous materials in sensitive areas where the failure of a single skin tank might cause a serious pollution incident or risk to human life. Extensively used in Scandinavian countries where environmental protection is maintained at a very high level.

Insulated tanks

Insulated tanks use 50mm rigid polyurethane foam encased within filament wound GRP Skins to prevent heat losses and maintain the temperature of the contents at above freezing .

Bunded tanks

Bunded tanks are supplied with an outer tank which will contain 110% of the contents in the event of a leak and if sited outside can have an integral rainskirt or can be completely encased within the outer tank which provides total containment.

Special lining tanks

GRP Tanks with special linings can be supplied where the contents are particularly aggressive or at higher temperatures and pressures


Silos with 60 degree cone bases mounted on galvanized steel support legs for powders and free flowing granular materials up to a capacity of 150 cubic meters. Can  be translucent, as wound, or colored to match buildings or surroundings for aesthetic purposes.

An alternative to 60 degree cone silos particularly for materials which are not free flowing or have a tendency to ‘bridge’ see Camplas ‘Sludge Settlement and Batch Mixing Tanks’ which have geodesic dished bases and are often used as a more suitable alternative to cone based silos.

10,000 SuperTanks now in service installed worldwide

Fully customisable

BS4994-1987(formerly BS4994-1973) with a minimum factor of safety of 8/1

Available from stock in 30, 40 and 50 cubic metre capacity

Key features of the Custom Built Tanks

High strength helically wound composite construction

Available in diameters 600mm-8000mm

Unaffected by U.V. degradation and very low temperatures

Contact us about Camplas Bespoke Tanks

Your email was sent successful.

Thank you for getting in touch! 

We appreciate you contacting Camplas.

One of our colleagues will get back in touch with you soon!